25 February, 2009

12mm TIMBER BACK PANELS ON TN9 -NO SCREWS!




want the same look of Infinity/TN7 but with the strength and availability of TN9? This is the solution:
- 12mm back panel with worked edges only on the sides
- tn9 12mm timber back crossbars (top and bottom)
- extra safety clips (soon available in plastic transparent)
- NO SCREWS !
As you're not using vertical rails, the timber touches the double fold of the tn9, so from timber back to the next you will have 20mm (+-) only.

cerchi l'estestica di Infinity/TN7 ma con la resistenza e la reperibilità di TN9? Ecco la soluzione:
- schienale legno 12mm
- traverse (superiore e inferiore) per tn9 e schienale 12mm
- clip (presto in plastica trasparente) per extra sicurezza
- NESSUNA VITE !
Non utilizzando il profilo verticale, fra uno schienale legno e il successivo rimarrano appena 20mm circa.

24 February, 2009

NEW Magnetic Divider






  • Compatible with ANY metal shelf.
  • No rails / no fixings!
  • Patended
  • CAEM BRANDED
  • available n colours from 500 pieces

  • Compatibile con QUALSIASI piano metallico.
  • Nessun profilo, nessun fissaggio!
  • Brevettato
  • marchio CAEM
  • disponibile coorato da 500 pezzi.

22 February, 2009

TFIVE






TFive means TwentyFive.
  • the shelf, 1 piece, is 25mm thick
  • the epos (32/36/40/60mm high) is hinging. So when the customer picks the product, the epos rotates
  • this means that the product will lay on the top of the shelf below up to the BOTTOM OF THE SHELF ABOVE. No waste of area is there!
  • if you have 5 shelves, you save 15mm x 5 = 75mm. Statistically, in a store with 400linear meters of shelving, this is 300.000 sq cm more to display product!
  • the front and the back of the shelf are "weld together". No open edges, maximum strength
  • no "U" channel, maximum higyene
  • maximum safety: the bracket and the base (new) remains inside the plank: NO EXPOSED EDGES
TFIVE significa TwentyFive, cioè 25. 25mm di spessore lordo

  • il piano intero è alto 25mm
  • i portaprezzi h 32 36 40 60 sono basculanti: quando il cliente ritira il prodotto il portaprezzo ruota in avanti
  • questo significa che il prodotto può arrivare a sfiorare la parte inferiore del piano che è sopra. Grande risparmio di sazione
  • Se ci sono 5 ripiani, 15mm x 5 = 75mm. Statisticamente, in un negozio con 400metri lineari di esposizione, si risparmiano 300.000 cm quadrati di facing x esporre più prodotti!
  • I bordo fronte e retro del piano sono saldati ai rinforzi, non ci sono bordi aperti, la rigidità è eleatissima
  • massima igiene, nessuna rientranza come 
  • Massima SICUREZZA: le nuove mensole e basi rimangono all'interno del ripiano, nessuno spigolo esposto!

20 February, 2009

SLAT PANELS IMPROVED ! Gap is Now 7mm (not 10mm)


REMEMBER THE CORRECT INSTALLATION- RICORDA IL MONTAGGIO CORRETTO


----------------------------------------------------------------------------------------------------------------------------------------------------------------

Slat panels are improving: from a Slat gap of 10mm we're going to a gap of 7mm. This will:
  • reduce likelihood that movements of the hook will undo it
  • higher the loading capacity.
my recomendation: slats are for specific application. Please double check when the customer requires 40cm or 50cm chrome accessories: if for heavy stuff a 40x20 bar will do the job.


Migliorano i nostri dogati: da un gap di 10mm passiamo ad un gap di 7mm.
  • riduciamo la possibilità che i ganci escano
  • aumentiamo la portata
un consiglio: se il cliente ha intenzione di usare ganci da 40cm e 50cm, meglio verificare. Se fosse per giacconi, una barra 40x20 è piu sicura.

18 February, 2009

Fifth Avenue - 2 Shops sold + 1 this quotation!





This is a 3d simulation of a store in Moscow. 
Francesco Bartolomei, one of our ICT guys, has made this as a first test of a wholly new MyShop, which will be out in 12 months time.

Fifth Avenue will only be available in this new MyShop so it will be Caem Italy to make this sort of renderings for you!

Questa simulazione 3d di Fifth Avenue riguarda un negozio di Mosca. Francesco Bartolomei ha realizzato questi rendering per testare un totalmente nuovo MyShop, che uscirà fra 12 mesi.
Fifth Avenue non verrà caricato in 3d sull'attuale MyShop, quindi per ambientazioni di questo tipo, sentire in azienda!

16 February, 2009

Print on Back Panels



I've seen many requests in the last few week about creating a high quality image in our back panels. When installed together the result can be impressive. And the job is easy because the transport is easy (Caem packing design), the installation is easy (no vinyl - no big boards). Attached are 4x 44 backs.

Faccio seguito alle molte richieste di grafica sugli schienali. Ricordo che è possibile serigrafare i nostri schienali, che una molta montanti rendono un ottimo impatto. Soluzione bella dunque, ma anche pratica (schienali imballati etc) e semplice da montare (niente mega-adesivi, mega pannelli etc). La foto mostra 4  schienali h44

see also: http://www.flickr.com/photos/caem-magrini/3196607688/in/set-72157612553592862/

13 February, 2009

CRM - Video Guide- 7 Steps

Video 1 : ENVIRONMENT



Video 2 : LEADS



Video 3 : CONTACTS



Video 4 : ACCOUNTS and SUBACCOUNTS



Video 5 : OPPORTUNITIES



Video 6 : REPORTS



Video 7 : OWNERSHIP and How to Work

11 February, 2009

CRM LINKS + CAEM Italy New PL91 Download Links

CRM

from anywhere in the internet:

from CAEM Italy offices:

from CAEM UK offices:

please create the above as favourites in your internet explorer.

WEBSITE

 from anywhere in the internet:

from CAEM Italy offices:

from CAEM UK offices:

PICTURES

 Some examples of links to SETS and links to SLIDESHOWS:

 --------------------------------------------------------------------------------------------------------

Guys we are a group and each company (Italy, Uk, India, Australia) has its own pricing policy. Please handle these documents with care.

Files are downloadable at these links. 

09 February, 2009

CAEM PRICES - NEW EXCEL TOOL !!!

with the issue of Caem Italy pl91, it's now available a powerful excel file.

you can:
  1. have graphic price list and code price list
  2. change the language with a click (type 1 2 3 4 etc) and print in the language you like
  3. change the currency /rate. Convert into your currency, simply input the rate! you can also give higher price lists out to show higher discounts to the customer You can also give nettprice lists
  4. compute weight loading capacity.
download it here
http://www.caem.it/Upload/Italia/CAEM-ACME_PriceList_PL91.zip

see how it works here
http://www.flickr.com/photos/caem-magrini/3266693458/